uneasy rider
MEMBER
- Joined
- Oct 2023
- Messages
- 83
Can I use the 26 V coils with a micro power ignition box?
Micro power ignition
- Thread starter uneasy rider
- Start date
Triton Thrasher
MEMBER
- Joined
- Feb 2009
- Messages
- 3,273
Boyer Micro Power ignition requires a CDI type coil, of low impedance around 0.6 ohm. That is different from the usual 6 or 12 volt “Kettering” coil.
I believe it can sometimes use two CDI coils in series, when you have four plugs in two cylinders.
Boyer Micro Power is still best avoided if you have any alternative.
I believe it can sometimes use two CDI coils in series, when you have four plugs in two cylinders.
Boyer Micro Power is still best avoided if you have any alternative.
uneasy rider
MEMBER
- Joined
- Oct 2023
- Messages
- 83
Best avoided?
Why is that?
Why is that?
Triton Thrasher
MEMBER
- Joined
- Feb 2009
- Messages
- 3,273
It is sometimes troublesome.
uneasy rider
MEMBER
- Joined
- Oct 2023
- Messages
- 83
Has anyone had problems with the micro power ignition box?
Triton Thrasher
MEMBER
- Joined
- Feb 2009
- Messages
- 3,273
I had a Micro Power blue ignition box that worked temperamentally, then went completely dead. That was about 16 years ago.
This year, my friend bought an XS650 that was running badly. He fixed it by renewing the Boyer Micro Power blue box.
This year, my friend bought an XS650 that was running badly. He fixed it by renewing the Boyer Micro Power blue box.
