Maney Belt Drive

Status
Not open for further replies.
cNw said:
Just to be sure that people know. I offer a stand alone cNw belt drive kit that uses the Poly Carbon belt (same as for the starter kit). The ratio is virtually the same as stock (chain). Some people, like Comstock, want a different primary ratio and at this time we are not making any other than our stock one.
Click to expand...

@ Matt,
I'd be interested to know pitch and number of teeth of the belt that comes with your kit. By the looks of it I guess pitch is 14mm.
I am playing with the idea of fitting your kit to the G15 range of bikes (the single row chain is completely inandequat for the Atlas engine). Driveshaft-to-mainshaft distance is shorter than that of the Commando, so either a shorter belt or a tensioning roller has to be provided.

-Knut
 
mdt-son said:
@ Matt,
I'd be interested to know pitch and number of teeth of the belt that comes with your kit. By the looks of it I guess pitch is 14mm.
I am playing with the idea of fitting your kit to the G15 range of bikes (the single row chain is completely inandequat for the Atlas engine). Driveshaft-to-mainshaft distance is shorter than that of the Commando, so either a shorter belt or a tensioning roller has to be provided.

-Knut
Click to expand...
Knut,

The pitch on the belt I use is 8mm. It is 21mm wide and 896mm long. 112 teeth total

Next size down is an 800mm (100 teeth) so that is almost 4" less

Matt
 
Status
Not open for further replies.
Back
Top