making a centrestand for a 74 commando with Dunstall 2-1-2

Status
Not open for further replies.

croz2803

Joined
Feb 6, 2013
Messages
15
Hi guys, i've seen photos of people having made centerstands for bikes with the 2-1-2 exhaust system and i was wondering if anybody has some measurements of them around.

Cheers

Andy
 
Re: making a centrestand for a 74 commando with Dunstall 2-1

I'm hoping someone responds with info to your post. I too want a centerstand for my bike with 2-1-2 pipes. Maybe Bwolfie will make a few sets that will balance the rear into the air and sell them here. :shock:
 
Re: making a centrestand for a 74 commando with Dunstall 2-1

It's on my list, I need to make one for the Dunstall i'm putting together to sell, so if all goes by well by summer I should have some to sell.

I have part if it made already, I need to finish it.
 
Re: making a centrestand for a 74 commando with Dunstall 2-1

That's great. I will be intersted in getting one when you've got them figured out. Maybe that's not what croz2803 was looking for but it's good for me. :D
 
Re: making a centrestand for a 74 commando with Dunstall 2-1

almost done with my design.. ill post some photos and measurments of it all once its done. i was making one to replace the sidestand for every day use. im possibly a little bit light to start my norton easily so i need every bit of leverage i can get.
 
Re: making a centrestand for a 74 commando with Dunstall 2-1

This Idea kept me up last night, and I came up with something that should work good and mount in the stock location. I'm going to try to make it to my shop this morning and see if it will work.
 
Re: making a centrestand for a 74 commando with Dunstall 2-1

mine works like a charm and fits onto what i believe is the standard frame for a '75 frame. im not sure if this changed with earlier models but it works for me :) ill post photos and dimensions soon.

Andy
 
Status
Not open for further replies.
Back
Top