mainshaft thread

Status
Not open for further replies.
Joined
Sep 28, 2004
Messages
55
Hi

Anyone who can tell me whta thread is used on the gearbox main shaft clutch end?

B.R.
Henrik
 
Hi Ron

Is this the amerian UN thread. :?:

Or did you type wrong and it should have been 9/16-18 UNF or 7/16-20 UNF.

Quite funny if they used an american thread on a U.K. bike. :D

B.R.
Henrik
 
No it will be Cycle, the cycle thread was not always 26 TPI, on the larger sizes 20 TPI was an option and I have seen it used on BSA's, Triumphs and of course Norton's.
 
Lucky said:
Quite funny if they used an american thread on a U.K. bike.

UNF and UNC are 'American' thread forms, and there are many of those used on Commandos.

9/16 inch x 20 should make it CEI (Cycle UK) thread.
 
Hi guys

Thanks for the info, guess I wont find a tool for that at work :lol:

Then I will just have to buy a Clutch rod seal, it is just that I
really enjoy making things myself and getting it work.

B.R.
Henrik
 
Status
Not open for further replies.
Back
Top