I would like to fit LED indicators to my 2015 Dominator. I have always used inline resistors before but I am looking at the modified relay unit which would control them all. Has anyone used these and if so which ones and what would they recommend. Thanks
Not on my Commando, but I have used one on my Gold Wing when I went to LED's and a 1961 Galaxie. It worked fine in both cases.
If there is some kind of audio alarm (beeper or buzzer) there might be an issue. Are your turn signals controlled by a separate flasher or the ECU. If it's the ECU I'm not sure how to handle that issue.
Could you tell me what brand of mirrors these are and how the quality is please. I have a 2016 SF, I assume these will fit my bars? Also does any know what would be needed to convert my upright bars to the cafe clip ons using original norton parts.
Thank you all.
They are Motogadget as per the previous comment and can be found here. http://motogadget.com/en/ The quality is really good and there finish as good as it gets. The mirrors are rock solid on the bars with no vibration. (other than the bars themselves)
Not sure about the clip ons as mine were already fitted. The indicators come with a variety of rubber collars to fit most bars.
Hello Voodooo , Richard-7 did the clip on bars conversion on his bike or his Dad did. In fact he converts back and forth when he feels like it. He is the one to ask and I think it was all Norton parts used .
They are my dads OEM NORTON CLIP-ONS purchased when he bought his SE. We share them and swap 'em out as needed. It only takes about an hour to swap. I just swapped back to standard bars for a few longer trips I'm planning and it worked out as my dad wanted the clip-ons for his SE with the aluminum tank. We are going to Mods and Rockers on SAT AUG 20th. TORONTO There is a hole in the bars to run wires.
The Access Norton Website uses cookies to keep you logged in if you register.
By continuing to use www.accessnorton.com, you are consenting to our use of cookies.