Leaking Fuel Tank Dominator

Voodooo said:

Are you sure it’s not the red plastic fuel connection elbow?

Click to expand...

glb said:

Hi Voodooo. The tank was partiallly removed the previous week so could be. I will take it apart next weekend and advise. Thanks for the input.

Click to expand...

glb said:

Another little problem Last weekend the bike ran great and didn't miss a beat. However there was a slight smell of fuel when parked up. Went out to use it this morning and found a small pool of petrol on the garage floor. I have drained the tank but no time to deal with it as I am flying out tomorrow The suspect is either the fuel pump gasket or a cracked weld. Anyone know where I can buy the gasket as I would like to build up small selection of easily replaceable parts. I checked with Thiele on their website and though they have gaskets they didn't list the full pump. Anyone know where I can purchase another. TIA

Click to expand...

• McMaster Carr # 1295N668 (Chemical-Resistant Viton® Fluoroelastomer O-Ring 5 mm Wide, 90 mm ID)
• Simply Bearings Ltd UK - BS621 Pack of 10 (5.33mm section 89.69mm ID) 7.86 pounds - I bought these.

TonyA said:

• McMaster Carr # 1295N668 (Chemical-Resistant Viton® Fluoroelastomer O-Ring 5 mm Wide, 90 mm ID)
• Simply Bearings Ltd UK - BS621 Pack of 10 (5.33mm section 89.69mm ID) 7.86 pounds - I bought these.

Click to expand...

TonyA said:

Hi Tony. Thanks for this. I have just ordered them.

• McMaster Carr # 1295N668 (Chemical-Resistant Viton® Fluoroelastomer O-Ring 5 mm Wide, 90 mm ID)
• Simply Bearings Ltd UK - BS621 Pack of 10 (5.33mm section 89.69mm ID) 7.86 pounds - I bought these.

Click to expand...

Voodooo said:

Do you recall who makes the aluminum fitting?

Click to expand...

TonyA said:

Not sure what you are referring to ? 90 Deg. elbow ?

Click to expand...

TonyA said:

Nice , Like to find that source .

Click to expand...

Voodooo said:

Well it looks like our friends City Garage and Coote’s know where they come from lol.

Looks like a small hole needs to be drilled and tapped. Seems nice and way better than plastic.

Click to expand...

TonyA said:

Looks hand made . Or I mean looks like a one off somebody made .

Click to expand...

Voodooo said:

Well it looks like our friends City Garage and Coote’s know where they come from lol.

Looks like a small hole needs to be drilled and tapped. Seems nice and way better than plastic.

Click to expand...

Panetone said:

My alloy fuel tank was leaking at the welding seam several times.
Norton has changed the fuel tank and a half year later was the new one also leaking.

Click to expand...

TonyA said:

Hello , Maybe City Garage can let us know how the get the aluminum elbow ? is 112 Norton Richard Coote ?

Click to expand...

Fast Eddie said:

And more to the point… what happened to the Coote’s ?

Click to expand...