Layshaft bearing orientation

B

BrianK

Joined

Jun 14, 2007

Messages

1,797

• May 21, 2009

• #1

The roller ball bearing has a lip on one side of the inner race - does that side face IN (to the bearing hole) or OUT (towards the gears)? Thanks

 

S

splatt

Joined

Jul 14, 2008

Messages

1,131

• May 21, 2009

• #2

If you put the step out you will need a very large hammer to smash the lip past the rollers :idea: , in against the gears.

 

B

BrianK

Joined

Jun 14, 2007

Messages

1,797

• May 21, 2009

• #3

I'm gonna take that as an "in." Thanks - BK

 

S

splatt

Joined

Jul 14, 2008

Messages

1,131

• May 21, 2009

• #4

Brian your in and my in are opposite, the step goes against 4th gear so the lay shaft can slip into the bearing and the the step should stop it slipping any futher.Old britt web site has a well worth while gearbox rebuild explaination.

 

B

BrianK

Joined

Jun 14, 2007

Messages

1,797

• May 21, 2009

• #5

Got it, thanks. Bearing's in.

 

swooshdave

Joined

Apr 15, 2009

Messages

11,527

• May 21, 2009

• #6

Since I already posted this link today it was easy to find.

Old Britts

 

B

BrianK

Joined

Jun 14, 2007

Messages

1,797

• May 21, 2009

• #7

The irony is I have Fred's instructions and am following them. I couldn't find this little snippet of info though. Thanks again