Lansdowne fitting

Fitted, taken apart now fitting again.
One bit I'm finding annoying is that I can't get the engraving to be square to the handbags, and it's different on each leg. All pictures I've seen show them perfect.

Any tricks or tips to doing this before I try and use varying washers to accomplish it?

Kind regards
Will

Undo the lower yoke clamp bolts and then turn the stanchions until the engraving lines up, reclamp stanchions into lower yoke.

kommando said:

Undo the lower yoke clamp bolts and then turn the stanchions until the engraving lines up, reclamp stanchions into lower yoke.

Click to expand...

Thanks, was tricky but this has helped. Just to fix the other problems now