Krauser Panniers

click · Jan 2, 2010

Hi Lads,

Looking for some pictures of a Norton Commando (ideally an ES MK3) with Krauser panniers rails fitted.

I got a used Krauser K1 system a while back but there are lots of brackets!!!

Happy New Year to all Norton Nuts around the world

Kevin

click · Jan 3, 2010

The system I have is like this: http://w6rec.com/duane/bmw/bags/krauser/T_set.jpg

I can figure out the two rear mounting points, top of shock mount & exhaust or footpeg mount but the rear mount is more difficult.

It would really help if somebody had a similar setup on their Commando & could post a few pics.

Thanks in advance.

Kevin

swooshdave · Jan 3, 2010

click said:
The system I have is like this:

I can figure out the two rear mounting points, top of shock mount & exhaust or footpeg mount but the rear mount is more difficult.

It would really help if somebody had a similar setup on their Commando & could post a few pics.

Thanks in advance.

Kevin

click · Jan 4, 2010

Back again

Thought I'd post a few pics on how I'm getting on, it might help others?

This is all still at the mock-up stage so no nasty comments about my dodgy bolts :roll:

I've got two mounts sorted at what I'll call the front, top & bottom of the frame.

The problem I have is where to find a fixing for the rear?

There is a sliding bracket which bolts the rear of the frames together but it does not give any support.

Any suggestions on where I can get a mounting point from?

Thanks in advance

Kevin

swooshdave · Jan 4, 2010

click said:
Back again

Thought I'd post a few pics on how I'm getting on, it might help others?

This is all still at the mock-up stage so no nasty comments about my dodgy bolts :roll:

I've got two mounts sorted at what I'll call the front, top & bottom of the frame.

The problem I have is where to find a fixing for the rear?

There is a sliding bracket which bolts the rear of the frames together but it does not give any support.

Any suggestions on where I can get a mounting point from?

Thanks in advance

Kevin

I assume this photo shows where you want a mount? Do you want something that clamps around the frame and then you attach the rack? Does the rack manufacturer offer any universal clamps?

click · Jan 4, 2010

Hi,

Thanks for the reply.

Krauser no longer make these frames so they cannot supply any fitting kits :cry:

Some type of clamp which would go around the rear loop might work.

Is there a "Clamp-R-US" shop somewhere on the internet?

Kevin

click · Jan 4, 2010

Hi,

Can somebody recommend a good clamp for the rear frame loop, I think its 1" tubing.

Many Thanks

Kevin

Krauser Panniers

click

click

swooshdave

click

swooshdave

click

click

Similar threads