Jetting 34 Mickey carb on 920 engine?

Status
Not open for further replies.
Joined
Oct 19, 2005
Messages
18,978
Country flag
To break in Peels cam I'd like to use one of the single 34 Mukuni kits I've on hand.
They are jetted for 750 Combat. Hoping someone has suggestions what to do to run it on a 920 just to decent start and run around safely for engine. I assume worse thing of too small a carb is just don't go real fast.
 

ML

Joined
Jul 30, 2007
Messages
853
Put a 40 plot jet in and make sure the choke plunger is operating OK to get a clean first kick start. Don't worry about the main jet etc' if all you want to do is to run it around.

Mick
 
Joined
Oct 19, 2005
Messages
18,978
Country flag
Ok thanks ML, that's pretty easy, I think. I thought like Amal when used on 850 it needed bigger thinner needle to supply extra fuel that for 750. A first kick start would sure make my decade.
 
Status
Not open for further replies.
Top