- Joined
- Dec 24, 2003
- Messages
- 362
Can anyone on the forum tell me the inlet valve guide angle off the machined head surface please ?
An inner valve spring broke on my 850 & it appears to have "hammered" the guide opening to a different angle.
What we thought would be a simple remove & refit, isn't.
The plan is to make a new blank guide & drill it out for the valve at the correct angle.
So, I am guessing someone knows the angle it should be.
Thanks in anticipation.
An inner valve spring broke on my 850 & it appears to have "hammered" the guide opening to a different angle.
What we thought would be a simple remove & refit, isn't.
The plan is to make a new blank guide & drill it out for the valve at the correct angle.
So, I am guessing someone knows the angle it should be.
Thanks in anticipation.