I know its been asked before...

Gibby · Apr 30, 2014

Posting images from Flickr? Any suggestions?

Norton Project (21) by timgibbons, on Flickr

Gibby · Apr 30, 2014

I have been out of the loop for a while; little thing called Cancer. Need some help putting this together. Next steps? Thks

pete.v · Apr 30, 2014

Gibby said:
I have been out of the loop for a while; little thing called Cancer. Need some help putting this together. Next steps? Thks

Wiring? Front end? Probably ought to get that harness in place along with mounting related componants.

Gibby · Apr 30, 2014

someone says I need to put the horn on NOW, no access later.

Nater_Potater · Apr 30, 2014

Gibby said:
someone says I need to put the horn on NOW, no access later.

+1 That's one of those anomalies of nature where the horn is somehow levitated in space, then the bike is built around it. A lot like the radio in my '73 Buick Riviera.

Nathan

Al-otment · May 1, 2014

Gibby said:
someone says I need to put the horn on NOW, no access later.

You'd be better off siting it somewhere which is accessible once the bikes finished and away from the wet and dirt. I've got two horns each mounted on the ignition coil brackets. Added benefit is the sound isn't muffled either.

kerinorton · May 2, 2014

I don't mind the horn being where it is, not that hard to get at but I fitted a second horn beside the battery, just in case one stopped working. Now sounds like a good 70"s car horn with high and low pitch.

Onder · May 2, 2014

Like a Trident. Good position for clear sound and easy access so you notice right away when they snap off
and disappear alongside the road.

I know its been asked before...

Similar threads