I am an addict. There, I said it. H2

View attachment 112690View attachment 112691 I am an addict. There, I said it. H2
I am an addict. There, I said it. H2
 

Attachments

  • I am an addict. There, I said it. H2
    04E20579-F889-438A-8095-ED9261A89811.jpeg
    302.9 KB · Views: 36
Ahhh yes the million dollar H2. Egged out hole repair? Saw someone was making billet heads for these.
 
Test fit with rubber mounts complete, spacer lengths calculated based on as-built dimensions, now on to transmission shimming.

I am an addict. There, I said it. H2
I am an addict. There, I said it. H2
I am an addict. There, I said it. H2
I am an addict. There, I said it. H2
I am an addict. There, I said it. H2
 
Last edited:
  • Like
Reactions: baz
OK Now what? I guess you were getting your cases blasted with plastic media? I use walnut shells it works very well on aluminum cases. I fear glass beads will not all clean out and cause problems later.

Shouldn't you be packing your bags LOL
 
mean gene said:
OK Now what? I guess you were getting your cases blasted with plastic media? I use walnut shells it works very well on aluminum cases. I fear glass beads will not all clean out and cause problems later.

Shouldn't you be packing your bags LOL
Click to expand...
Flying in Tuesday.....
Got a lot to do before then.

Soda?
Or vapor?

What say the esthetic contingent?


Packing? 20 minutes before I leave..
I am an addict. There, I said it. H2
 
I use these guys. Vapor hone.
Then again, they are local to me and I drop off.
They do a lot of mail order.
Check out the gallery.

partsreborn.com

Parts Reborn

Parts Reborn
partsreborn.com partsreborn.com
 
mean gene said:
OK Now what? I guess you were getting your cases blasted with plastic media? I use walnut shells it works very well on aluminum cases. I fear glass beads will not all clean out and cause problems later.

Shouldn't you be packing your bags LOL
Click to expand...
I was stopping by, to ask if he did vapor or soda.
Neither. Sadly, he's closed up shop.
 
concours said:
I was stopping by, to ask if he did vapor or soda.
Neither. Sadly, he's closed up shop.
Click to expand...
I used soda blasting on my cast aluminum engine / gearbox stuff on my Commando. Cheap Harbor Freight blast cabinet. ( leaks at every joint ) Here is a pic when it was fresh -
Aluminum sealed with Shine Seal ( formerly Zoop Seal )
I am an addict. There, I said it. H2
 
  • Like
Reactions: baz
You must log in or register to reply here.
Back
Top