GRANVILLE GEAR BOX MODS
- Thread starter zilo31
- Start date
- Status
- Joined
- Oct 19, 2005
- Messages
- 18,978
In mean time before most get back to work station terminals, RGM basics ...
http://www.rgmnorton.co.uk/csi/1245184/ ... _notes.pdf
hobot mods are spiral grooved sleeve bushes short of leaking outside the outer bush, grind a bit of end of cable end lever notch for easier slip in, clear paint stuff under outer cover above oil lever d/t rust, back up the kicker shaft o-ring groove with cig foil thickness to compress factory o-ring better, then light grease and shove in with smear of favorite color RTV or Hylomar and leave gaskets out to take up lay shaft shimmy shiming, other wise shim tight then space back gap with gasket. After rebuild good id to change lube pretty soon for the longer term lube. Locktite the TS mainshaft nut secure.
http://www.rgmnorton.co.uk/csi/1245184/ ... _notes.pdf
hobot mods are spiral grooved sleeve bushes short of leaking outside the outer bush, grind a bit of end of cable end lever notch for easier slip in, clear paint stuff under outer cover above oil lever d/t rust, back up the kicker shaft o-ring groove with cig foil thickness to compress factory o-ring better, then light grease and shove in with smear of favorite color RTV or Hylomar and leave gaskets out to take up lay shaft shimmy shiming, other wise shim tight then space back gap with gasket
- Status
Similar threads
