gearshift conversion seal

Status
Not open for further replies.
Joined
Feb 20, 2008
Messages
114
Does anybody out there know the serial # of the gearshift conversion seal thanks
 
Joined
Jan 10, 2005
Messages
1,043
Country flag
For gearshaft try..........
5/8" x 7/8" x 3/16", NTK 1388 087 062 015 or similar lip seal
That was in an old Dommie outer case on my Commando. Since replaced the covers for Commando parts and use the "O" ring. It doesn't leak but i do have the inner cover breather.
For kickstart try.......
1" x 1-1/4" x 1/8" TTO C195 1 8C 125 100 12 or similar
This goes straight in with no machining but needs the OD to be sealed as the bore machining is often rough here. I use Cyano as silicone doesn't seem to hold it well enough.
 
Joined
Feb 20, 2008
Messages
114
seal ID #

thanks for the info, but what I was going to use instead of silicone is bearing loctite on the o.d
 
Status
Not open for further replies.
Top