oldbeezer Joined Nov 2, 2017 Messages 599 Jan 30, 2019 #1 I see in the parts drawings for the gearbox inner cover there is no washer/gasket for the gearbox plunger housing. Is that correct? Thanks, Jim
I see in the parts drawings for the gearbox inner cover there is no washer/gasket for the gearbox plunger housing. Is that correct? Thanks, Jim
L.A.B. Moderator VIP MEMBER Joined Nov 20, 2004 Messages 20,082 Jan 30, 2019 #2 That is correct except for the 850 Mk3. https://www.accessnorton.com/NortonCommando/index-plunger-housing.25800/
That is correct except for the 850 Mk3. https://www.accessnorton.com/NortonCommando/index-plunger-housing.25800/
lazyeye6 VIP MEMBER Joined Feb 28, 2014 Messages 1,088 Jan 30, 2019 #3 Is that why my Mk 11 has a very slow drip there?
oldbeezer Joined Nov 2, 2017 Messages 599 Jan 30, 2019 #4 L.A.B. said: That is correct except for the 850 Mk3. https://www.accessnorton.com/NortonCommando/index-plunger-housing.25800/ Click to expand... Thank you L.A.B. JIm
L.A.B. said: That is correct except for the 850 Mk3. https://www.accessnorton.com/NortonCommando/index-plunger-housing.25800/ Click to expand... Thank you L.A.B. JIm
olympus Joined Aug 5, 2017 Messages 1,401 Jan 31, 2019 #6 I used three bond left over from the bottom end rebuild
oldbeezer Joined Nov 2, 2017 Messages 599 Jan 31, 2019 #7 I think I'll try teflon tape. Unless someone points out a reason why I shouldn't.