Front rim offset

Status
Not open for further replies.

prmurat

Joined
Jun 6, 2003
Messages
492
Taking my stock wheel apart to install an Xcell , in 19 WM2, I measured arounf .515 offset from the hub/disc place to the outside of the rim. does that look ok? will I need more with the CNW Brembo?
Thanks
Philippe
 
From the disc flange on the hub, to the center of the rim is 1 7/8" If you use this measurement it dose'nt matter how wide the rim is.

Ken G.
 
Status
Not open for further replies.
Back
Top