Free Kickstart Rubbers

Tornado · 2026-03-11T11:18:36-0600

ashman said:
Why, set up your bike to start first kick every time and have the knack of kicking it to life, so many buy Commando's without the knack lol.

Was referring to the 920cc machine video.

ashman · 2026-03-11T14:38:17-0600

Tornado said:
Was referring to the 920cc machine video.

Yes but it didn't start first kick.

Schwany · 2026-03-11T18:38:50-0600

Heck I can spin that hunk of rubber on my kick start lever. And, the lever is sticking out the end of it. Probably should change it out someday.

Schwany · 2026-03-11T18:52:05-0600

Fast Eddie said:
If it amuses you…

Funny to watch not so funny to experience that stop of the kick. I know what it is like.

Wish I had the energy to re-engineer a cNw starter so I could use one on my P11. Although it might be a heck of a lot cheaper to put mid-CR JS long rod pistons in my engine and remove the high CR JS pistons. Yeah that's the ticket.

robs ss · 2026-03-11T18:52:28-0600

Schwany said:
Heck I can spin that hunk of rubber on my kick start lever. And, the lever is sticking out the end of it. Probably should change it out someday.

I'd send a couple to you, but the postage to the states would probably pay for ten.

Schwany · 2026-03-11T19:02:11-0600

robs ss said:
I'd send a couple to you, but the postage to the states would probably pay for ten.

Thanks I'm not entirely sure they are the same as what ends up on a P11 kick start. I haven't had a Commando since the late 1980's. I feel your pain on the postage for certain. I'm currently in a not ordering anything that would be shipped from outside the US mode. Really puts a damper on having a Norton toy. Fortunately I can also pretend like I'm done messing with it. I'll see how long that lasts.

Fast Eddie · 2026-03-12T01:21:32-0600

Schwany said:
Funny to watch not so funny to experience that stop of the kick. I know what it is like.

Wish I had the energy to re-engineer a cNw starter so I could use one on my P11. Although it might be a heck of a lot cheaper to put mid-CR JS long rod pistons in my engine and remove the high CR JS pistons. Yeah that's the ticket.

Low CR pistons in your P11?

Are you giving it to the Missus ??

Schwany · 2026-03-12T08:17:15-0600

Fast Eddie said:
Low CR pistons in your P11?

Are you giving it to the Missus ??

Good point. Maybe just a .040" copper head gasket. Way less work than doing pistons.

She'd put C4 in the fuel tank with a remote detonator and push the button with it in the garage. Boom

Tornado · 2026-03-12T11:59:03-0600

Schwany said:
Good point. Maybe just a .040" copper head gasket. Way less work than doing pistons.

She'd put C4 in the fuel tank with a remote detonator and push the button with it in the garage. Boom

Sounds like the Kaufmann cartridge shells used in "Flight of the Phoenix" movie to fire up the engine.