Fit the gearbox in place

pierodn · Dec 28, 2016

Hi.
I am going to fit the gearbox in place.
A question, please.
The up and bottom fixing studs, have only two internal spacers that go only to the timing side, or four that go both side?.
Thank you.
Piero

grandpaul · Dec 28, 2016

I seem to recall same as Commando, one spacer and the rest of the fixing points are thickened / welded to the mount plates.

It has been years, so the recollection is foggy...

Photos from my thread don't help because engine and transmission were essentially in one lump.

pierodn · Dec 28, 2016

Hi.
Sorry, but i dont think so.
Thanks.
Piero

grandpaul · Dec 28, 2016

I may have been thinking of the N15 that I restored...

Mike B · Dec 28, 2016

By memory, I can only recall one spacer, timing side upper. I guess their could be one lower, but not four.
Mike B.

CanukNortonNut · Dec 28, 2016

The P11 yahoo group has a pdf for spacers for the P11
https://groups.yahoo.com/neo/groups/nor ... =463990195
Thomas

Ron L · Dec 28, 2016

One spacer each (P/N 030250) fitted between the timing side rear engine plate and the top and bottom gearbox mounting lugs.

CanukNortonNut · Dec 28, 2016

Ron L said:
One spacer each (P/N 030250) fitted between the timing side rear engine plate and the top and bottom gearbox mounting lugs.

You got it. OD 1" x .156" x 7/16" bore.
Cheers,
Thomas

pierodn · Dec 29, 2016

Hi.
Thank you so much for helping me.
Have a new good year.
Piero

Fit the gearbox in place

Similar threads