fairing help

I'm hoping there is someone out there with a fastback who has tried to mount a similar fairing using a similar bracket. I am struggling with this and need some help.....Some detailed photos of the bracket attachment point to the fairing, the bar attachment to the forks (I'm using Tomaselli's) etc...Any other tips much appreciated (no I wont toss it in the bin)

Many thanks

dunstall fairing bracket ;

dunstall-fairing-mount-bracket-t17813-15.html?hilit=Seardunstall%20fairing%20bracket%20ch%20this%20forum…#p222669

Top photo is how it came-there was a large “U “ bend steel rod with threads die cut onto each end. This wraps around the headstock, ( look at a car exhaust clamp that is similar)

not sure why this image didn't post.....

There should be a pair of mounting clips that bolt to the fairing, which also slip over and clamp to the ends of the forward-facing u-pipe.

Those fairings typically do not include a lower brace which can be a single long angle section bar with a bolt through each of the fairing lowers, and clamps (gently, with protective split rings of thin metal) to the two front frame downtubes.