- Joined
- Oct 9, 2004
- Messages
- 198
(Sorry for the cross-post, here and at BritIron)
Dave,
As you seem to have spent considerable time with Norton ingition systems, I figured you might be able to help me with a question.
I came into a Crane, dual tower, ignition coil the other day. http://cranecams.com/pdf/90003005.pdf It was new, in the box, and being clearanced for $70 (down from $135).
The bike has a Boyer unit installed, but retains the 2-6v coils.
The Crane is a siamesed setup (2-12v coils in one housing) and has 2 negative terminals.
Do you think its useable? How would one wire it? Would an alternator/voltage regulator upgrade be required to push two 12v coils?
Thanks much.
Take care,
David
Dave,
As you seem to have spent considerable time with Norton ingition systems, I figured you might be able to help me with a question.
I came into a Crane, dual tower, ignition coil the other day. http://cranecams.com/pdf/90003005.pdf It was new, in the box, and being clearanced for $70 (down from $135).
The bike has a Boyer unit installed, but retains the 2-6v coils.
The Crane is a siamesed setup (2-12v coils in one housing) and has 2 negative terminals.
Do you think its useable? How would one wire it? Would an alternator/voltage regulator upgrade be required to push two 12v coils?
Thanks much.
Take care,
David