I'm going to use a set of old Dunstall rear sets on my 73 850 for a while. I'll make or buy some nicer ones later but for now I just need to get back on the road. Problem is I just tried to mock up the gear shift & found that It seems to hit the kick start lever in both directions. I moved the kick start lever to a vertical position but it seems I won't have much room for the shifter to move. Again I have not fitted the linkege, just put the foot peg & shifter arm on. I used Dunstall sets on two 750's years ago & don't remember this issue. Is is a senile moment or are the 750 kick start levers different? Or perhaps my shifter was made for another model? Doubtful as the brake side has the plate to mount to Commando Z Plates. Thanks for any help.