Dunstall 810 tail and seat

Status
Not open for further replies.
P

pierodn

Country flag
Could you please help me understand how do I mount fiberglass tail and seat  of Dunstall 810.
The fiberglass tail is fixed or floating with the same hooks fastback/roadster/interstate?
The seat (foam part) must be attached to the fiberglass tail or is mobile?
Thank you.
Ciao
Piero
 
Hello Piero,
On my Dunstall the fiberglas seat base has a hook under the tail to attach under the back of the support loop, and holds to the fuel tank by Velcro. The seat cover is held to the fiberglas tail piece also with Velcro. Some have said this is a rather "inelegant solution" but it does work well and I actually like it. I can open the Velcro at the rear seat to tailpiece junction and place my registration, etc. there for easy access. I hope this helps.
Lance
 
L.E.N. said:
Hello Piero,
On my Dunstall the fiberglas seat base has a hook under the tail to attach under the back of the support loop, and holds to the fuel tank by Velcro. The seat cover is held to the fiberglas tail piece also with Velcro. Some have said this is a rather "inelegant solution" but it does work well and I actually like it. I can open the Velcro at the rear seat to tailpiece junction and place my registration, etc. there for easy access. I hope this helps.
Lance
Click to expand...

Hi Lance please,
Could you send me some pictures to
dinuccip@tin.it
Thank you so much.
Ciao
Piero
 
Status
Not open for further replies.
Back
Top