Dunstall 810 tail and seat

pierodn · Jan 11, 2016

Could you please help me understand how do I mount fiberglass tail and seat of Dunstall 810.
The fiberglass tail is fixed or floating with the same hooks fastback/roadster/interstate?
The seat (foam part) must be attached to the fiberglass tail or is mobile?
Thank you.
Ciao
Piero

L.E.N. · Jan 11, 2016

Hello Piero,
On my Dunstall the fiberglas seat base has a hook under the tail to attach under the back of the support loop, and holds to the fuel tank by Velcro. The seat cover is held to the fiberglas tail piece also with Velcro. Some have said this is a rather "inelegant solution" but it does work well and I actually like it. I can open the Velcro at the rear seat to tailpiece junction and place my registration, etc. there for easy access. I hope this helps.
Lance

pierodn · Jan 11, 2016

L.E.N. said:
Hello Piero,
On my Dunstall the fiberglas seat base has a hook under the tail to attach under the back of the support loop, and holds to the fuel tank by Velcro. The seat cover is held to the fiberglas tail piece also with Velcro. Some have said this is a rather "inelegant solution" but it does work well and I actually like it. I can open the Velcro at the rear seat to tailpiece junction and place my registration, etc. there for easy access. I hope this helps.
Lance

Hi Lance please,
Could you send me some pictures to
dinuccip@tin.it
Thank you so much.
Ciao
Piero

L.E.N. · Jan 12, 2016

PM sent

pierodn · Jan 13, 2016

Thank you Len.
Ciao
Piero

Dunstall 810 tail and seat

pierodn

L.E.N.

pierodn

L.E.N.

pierodn

Similar threads