Dave Taylor replacement heim joints

MikeG

VIP MEMBER

Joined

May 31, 2012

Messages

1,312

• Dec 25, 2023

• #1

Anybody got a source for these? Last time I used some from Dorman Industries,lasted about three years. IMHO the whole design is a bit light for the job. Might try to adapt 3/8 inch joints instead of the 5/16 ones standard?

 

kommando

Joined

May 7, 2005

Messages

7,163

• Dec 26, 2023

• #2

There are seals you can get for the sides, I have them on my rear sets rod. Will post a link later.

US seller

Buy Raceparts Heim Joint Side Seals | RERS1 - race-parts.com

Buy your replacement Raceparts Heim Joint Protective Side Seals from us at Raceparts USA and get your heims protected from the dirt and water.

www.race-parts.com

Keeps initial lube in and dirt out.

 

Last edited: Dec 26, 2023

cash

Joined

Nov 10, 2006

Messages

1,530

• Dec 26, 2023

• #3

The 5'16" unsealed SKF joints fitted to the original steady in 2002 are still working well, no play at all. RGM will have a spare set available.

 

YING

Pittsboro,NC

VIP MEMBER

Joined

Aug 12, 2011

Messages

1,187

• Dec 26, 2023

• #4

Mike, Go to McMaster-Carr.They can fix you up for the dust covers

Mike