crank nuts

htown16

VIP MEMBER

Joined

Apr 29, 2009

Messages

1,573

• Jun 22, 2020

• #1

With the crank held in the vise by the counterweight do the long studs and nuts go on the top or bottom holes?

 

kommando

Joined

May 7, 2005

Messages

7,609

• Jun 22, 2020

• #2

Online workshop manual page 56 Section C27 has a diagram covering nuts and stud sizes and positions.

http://britmoto.com/manuals/Manuals/750_man.pdf

Long studs to top holes but check the diagram to compare crank orientation.

 

htown16

VIP MEMBER

Joined

Apr 29, 2009

Messages

1,573

• Jun 22, 2020

• #3

Got it, thanks

 

CanukNortonNut

Joined

Aug 8, 2005

Messages

2,975

• Jun 22, 2020

• #4

Why we call it "inspection"...(2018)

'74 Roadster, 43,000 miles (of which, the last 31,000 were well cared, not abused, and there is no reason to think the first 12,000 were different). No unusual noise whatsoever, and I listened. Timing side main has failed.

www.accessnorton.com

Here is thread that should help.
Cheers,
Tom