- Joined
- Dec 27, 2008
- Messages
- 295
pulling the gearcase off my '72. got the primary removed. i'd like to get the countershaft sprocket off to make it easier to wiggle the gearbox out. i need to know the size of the lh nut. figure to buy an offset box wrench. can you even get the gearbox out w/ the sprocket still attached?
on a side note; this is supposed to be a non combat '72. there's no c stamp i can find on the head. counted the sprocket teeth at 20, isn't 22 std.? where the head mates to the jugs the gap between the fins is definitely less than between the other fins. it came w/30mm amals. prolly the po changed some stuff around. thanks, from rick in bone chilling southern indiana
on a side note; this is supposed to be a non combat '72. there's no c stamp i can find on the head. counted the sprocket teeth at 20, isn't 22 std.? where the head mates to the jugs the gap between the fins is definitely less than between the other fins. it came w/30mm amals. prolly the po changed some stuff around. thanks, from rick in bone chilling southern indiana