Commando Bling, "Maney-style"

Status
Not open for further replies.

Unclviny

Joined
Jul 31, 2009
Messages
738
Well,
It was Payday so "Commando Bizarro" HAD to get something (RIGHT?), it is the Oil Junction Block from Hell (with Aeroquip fittings).

http://www.stevemaney.com/products.html (scroll to the bottom of the page).

I even found a Stainless Button-head replacement for the bolt.

Unclviny
 
What is Aeroquip fittings if I may ask.

Didn't think about a button head for that bolt, good idea, I think it is a 1/4-20 at any rate which should be easy to find in a SS button head. Now you need another special shortened Allen wrench to get in there.

Dave
69S
 
uncleV will have coolest fast oil flow going.
Aeroquip is a brand for the anodized Al fittings usually seen with SS braid hose on hot rods to air craft. No Hose Clamps in other words. I did know Maney was offering this item so I had to spend about that much on fittings that adapt hose to hard tube.
 
The block has fittings for Stainless, braided hose.

03-0448 junction block bolt is 5/16" X 18TPI X 7/8"

The "pile-o-Commando-bits" continues to grow.

And the cut-down Allen Wrench is not a problem, go to a Pawn shop and if the ends a "boogered up" you can beat them up for a better price! (and cut the bad part off, you were going to do that anyway).

Unclviny
 
I was looking at it for awhile. Decided I had spent enough already lol.

Post a pic once you get it installed. :wink:
 
It looks like one could also use just regular oil line clamps or am I wrong?
 
Yeah, 5/16-18, my mistake, one of the few on the bike. Hobot says no clamps for the Aeroquip. How does this work? I would like to see that. I did look it up, but didn't learn much.

Dave
69S
 
The threaded Couplers are crimped on to the Line, you buy the hoses with the fittings, cut and oriented to your specifications. Go to the website and play with the "design a hose" deal.

Unclviny
 
The basic term for these fittings is AN for Army Navy grade specs.

http://www.aeroquip.cc/?gclid=CK7H4ePd9 ... 7AodO2cW1g

Commando Bling, "Maney-style"



I find best prices and selection here
http://www.jegs.com/c/Fuel-Carbs-Intake ... 9/10002/-1

JEGS Hard-Line AN Adapter Fittings
Commando Bling, "Maney-style"

Hard tube AN adapters connect 3/8", 1/2" and 5/8" tubing to AN fittings with ease. Worry no longer about flaring and splitting aluminum tubing to make connections. Simply slide tubing into tube nut, install ferrule & attach tube end. Connect 3/8" tube to -6AN male, female end and 1/2" tube to -8AN male or female and 5/8" tube to -10AN male or female
 
Hobot,
I really did not need a new place to spend my $ (my Banker would like to have a word with you) but Jeg's sure has some cool-toys that I can not live without.

Unclviny
 
Viny, first part of brain to rot away in Norton infection is rational accounting part.
Next is an over swollen rationalization part. Then we die with a grin or a chuckle, so WTF. We are too late to save, but warning to others, to remove oil hose clamps and fit a filter that would fit in new Ms Peel, cost over $300. Don't know what you expect to get out of it in the end but I want bats diving into the head and my helmet lugging along to hear the ringing tinkles of Norton then whip up on SR1000's below 170 or so. Trixie in the works in just girl next door, easy but not nearly as exciting to die for. Use em up while ya can.
 
hobot said:
Viny, first part of brain to rot away in Norton infection is rational accounting part.
Click to expand...

as one so afflicted i can only agree :D
 
Status
Not open for further replies.
Back
Top