- Joined
- Jan 30, 2009
- Messages
- 591
My 750 combat is cold on the primary side exhaust.
I kick it over & shortly the exhaust gases are warm from the timing side exhaust.
The primary side seems like it never warms up.
The Primary side cylinder and pipe seem to get hot eventually but I think it is surrounding heat transfer.
I have strong spark at the plug.
Adjustment on either side idle speed screw w/ both cylinders firing varies the idle speed.
A finger over the pilot airway at idle at the mouth of the carb again primary side starts to stall cylinder.
If I pull the plug wire off on the primary side the bike continues to run on the timing side cylinder.
If I pull the TS while idling on both cylinders the bike stalls.
It refuses to run on the primary side cylinder solo.
What is going on here?
Thanks,
Marshal
I kick it over & shortly the exhaust gases are warm from the timing side exhaust.
The primary side seems like it never warms up.
The Primary side cylinder and pipe seem to get hot eventually but I think it is surrounding heat transfer.
I have strong spark at the plug.
Adjustment on either side idle speed screw w/ both cylinders firing varies the idle speed.
A finger over the pilot airway at idle at the mouth of the carb again primary side starts to stall cylinder.
If I pull the plug wire off on the primary side the bike continues to run on the timing side cylinder.
If I pull the TS while idling on both cylinders the bike stalls.
It refuses to run on the primary side cylinder solo.
What is going on here?
Thanks,
Marshal