- Joined
- Jan 18, 2012
- Messages
- 130
Hi I've had an ignition coil failure just after a complete engine rebuilding.
Coils where a pair of new PVL made in Germany. Pazon ignition fitted.
I made a stupid mistake wiring the ignition plate with inverted YB and WB wire...immediately turned to correct. Could this have been damaged the ignition?
Then I turn to a new pair of commercial Coils from RGM. After just 1200 km I've the same problem. I've repalaced one of them and everything seems to work fine.
What do you suggest to check to be sure to avoid a new failure in the future?
Previous Coils worked for years with no problems.
Thanks in advance
Thomasdunstall
Coils where a pair of new PVL made in Germany. Pazon ignition fitted.
I made a stupid mistake wiring the ignition plate with inverted YB and WB wire...immediately turned to correct. Could this have been damaged the ignition?
Then I turn to a new pair of commercial Coils from RGM. After just 1200 km I've the same problem. I've repalaced one of them and everything seems to work fine.
What do you suggest to check to be sure to avoid a new failure in the future?
Previous Coils worked for years with no problems.
Thanks in advance
Thomasdunstall