1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

CNW Clutch Center

Discussion in 'Norton Commando Motorcycles (Classic)' started by swooshdave, Jun 19, 2019.

  1. lcrken

    lcrken VIP MEMBER

    Joined:
    Mar 15, 2009
    What am I missing here? Do you not still use a circlip with these centers? Or are they machined so that the center has a stop for the end of the splined shaft, as on some pre-Commando models?

    Ken
     
  2. lazyeye6

    lazyeye6 VIP MEMBER

    Joined:
    Feb 28, 2014
    I used a circlip on mine along with the spacer. There was nothing that came with it saying otherwise and it works fine.
    40# with blue locktite.
     
  3. Fast Eddie

    Fast Eddie VIP MEMBER

    Joined:
    Oct 4, 2013
    Just to clarify gents, my question was directed at Mike Brooking, who’s running a TTI box. I am under the impression that the TTI box doesn’t use the circlip on the mainshaft....
     
  4. swooshdave

    swooshdave

    Joined:
    Apr 15, 2009
    I will make it my personal mission to read every one of your posts from now on!
     
  5. Brooking 850

    Brooking 850 VIP MEMBER

    Joined:
    Oct 3, 2011
    60ft lbs and lock wire on both bikes
     
  6. Brooking 850

    Brooking 850 VIP MEMBER

    Joined:
    Oct 3, 2011
    All good Dave, just wondered why there was a few questions re centres when it was all in the text.
    Good luck with your current project.
    Regards mike
     
  7. swooshdave

    swooshdave

    Joined:
    Apr 15, 2009
    Always looking for clarifications. Some people, ahem, are extremely frugal with their text. I ask the questions it's because there is a long line of people too afraid to ask. :cool:
     

Share This Page