cNw / Brembo / Lucas clamp

cNw · Jan 20, 2015

Hey,

Just wanted to let those know that are interested that I just finished up the clamp that will allow you to use the stock Lucas handlebar switch when converting to a Brembo master cylinder (brake and/or clutch)

Details here http://coloradonortonworks.com/part-cat ... #post-1140

Matt / Colorado Norton Works

http://www.coloradonortonworks.com

ILLF8ED · Jan 20, 2015

Hi Matt,

Very similar to what Madass140 is offering and I just installed.

850cmndo · Jan 20, 2015

I'm missing something...I'd like to see the wiring coming out of the switch....

cNw · Jan 20, 2015

850cmndo said:
I'm missing something...I'd like to see the wiring coming out of the switch....

Added some images above.

Matt / Colorado Norton Works

www.coloradonortonworks.com

brokeneagle · Jan 20, 2015

Will this, or do you make one that will fit Mark III stock switch? Thanks Matt.

cNw · Jan 20, 2015

brokeneagle said:
Will this, or do you make one that will fit Mark III stock switch? Thanks Matt.

This unfortunately does not work with the 1975 switch gear. That's a whole different set up and I am not sure I will get to that any time soon.

Matt / Colorado Norton Works

www.coloradonortonworks.com

motorick · Jan 20, 2015

Beautiful work, as always Matt. Thanks for your continued efforts of developing our Nortons!

850cmndo · Jan 20, 2015

CNW said:
850cmndo said:

I'm missing something...I'd like to see the wiring coming out of the switch....

Click to expand...

Added some images above.

Matt / Colorado Norton Works

http://www.coloradonortonworks.com

Thanks Matt. It appears one would not need to make mods to the switch body.

850cmndo · Jan 20, 2015

850cmndo said:
CNW said:

850cmndo said:

I'm missing something...I'd like to see the wiring coming out of the switch....

Click to expand...

Added some images above.

Matt / Colorado Norton Works

http://www.coloradonortonworks.com

Click to expand...

Thanks Matt. It appears one would not need to make mods to the switch body.

That being said. Is there a lever to mount that would mimic the appearance of the stock clutch lever?

cNw · Jan 21, 2015

There is a Polished lever option for the Brembo master. Its a ball end lever but its shaped differently than the stock lever. Would not call it a great match

However, I do have a Magura clutch perch that uses a lever that looks very similar to the Brembo. The Lucas clamp will fit on this clutch perch as well

http://coloradonortonworks.com/part-cat ... /#post-178

Matt / Colorado Norton Works

http://www.coloradonortonworks.com

850cmndo · Jan 22, 2015

Thanks again Matt.