I started hooking up my clutch cable today, and noticed I wasn't getting any spring tension coming back on the cable when I pulled on the clutch. I took off the outer cover and removed the clutch release body... with the ball bearing and the clutch release arm inside... revealing a long rod that runs horizontally through the engine on the same axis as both wheel axles. I was expecting there to be some kind of spring action on this rod, as it's what ultimately gets pressed when you pull on the clutch, but there was nothing... I pulled on it and it slid out... I cleaned it off and pushed it back in. I tapped it a few times lightly with a rubber mallet but it seems like this rod is up against a brick wall or something. Shouldn't there be some kind of spring action return when that clutch release arm is pulled? Does anyone have any idea what's going on in there?