Circlips old question

pierodn · Apr 23, 2020

Hi All.
Goes the shamfer side or the sharp/cut edge, in the outside position?.
Thank you
Piero

cliffa · Apr 23, 2020

pierodn said:
Hi All.
Goes the shamfer side or the sharp/cut edge, in the outside position?.
Thank you
Piero

Hi Piero, for piston circlips sharp side to the outside.

Cheers,

cliffa.

pierodn · Apr 24, 2020

cliffa said:
Hi Piero, for piston circlips sharp side to the outside.

Cheers,

cliffa.

I agree.
Thank you.
Piero

guest76 · Apr 24, 2020

@pierodn I guess you have that difficult decision to make now - do you lift your barrel and put your circlips in correctly.

Or do you leave it and take the risk?

pierodn · Apr 24, 2020

gtiller said:
@pierodn I guess you have that difficult decision to make now - do you lift your barrel and put your circlips in correctly.

Or do you leave it and take the risk?

View attachment 15782
View attachment 15783

Hi.
I have removed the cylinder; the circlips were right way fitted all with sharp cut side outward.
I dont know why i tought the contary.
May be the red painture cinfused me.
Thank you in any case.
Piero

guest76 · Apr 24, 2020

I guess that’s the right move... otherwise there would always be a question at the back of your mind.

Now you can grab a handful of throttle with no worries!

Circlips old question

pierodn

cliffa

pierodn

guest76

pierodn

guest76

Similar threads