Chrome Shrouds for Fastback Shocks

Status
Not open for further replies.

Lorenzo

Joined
Mar 27, 2011
Messages
410
Country flag
anyone can tell where to get the original looking shrouds for the rear Fastback shocks?
thanks for helping!
 
Haven't found a source for the chrome top covers, but have found the complete shocks with covers at Andover (P/N 06-0641). Painted uppers could be trimmed and chromed.
 
Saw this on Waldridge's site;

Girling Replica Shock Cover Will fit original Girling and also NJB units
4” Chrome Covers Part no. 9054/47pr
5”Black Covers Part no. 9054/151p

I dont know how much they cost but with the exchange rate it's 30% off the Canadian $ listed

Dave
 
drp said:
Saw this on Waldridge's site;

Girling Replica Shock Cover Will fit original Girling and also NJB units
4” Chrome Covers Part no. 9054/47pr
5”Black Covers Part no. 9054/151p

I dont know how much they cost but with the exchange rate it's 30% off the Canadian $ listed

Dave
Click to expand...
but more with 22 % of VAT and 9% of custom
 
Most of the covers shown are bottom covers. I suppose they work as top covers when no bottom covers are necessary?
 
Ron L said:
Most of the covers shown are bottom covers. I suppose they work as top covers when no bottom covers are necessary?
Click to expand...

thank you: clear enough.. I understand this is the reason why they have the crease at the bottom?
 
The original shrouds also have four smaller "noses" around the perimeter. Not a complete ring.
These were also bottom chrome shrouds used as top chrome shrouds.
 
drp said:
Saw this on Waldridge's site;

Girling Replica Shock Cover Will fit original Girling and also NJB units
4” Chrome Covers Part no. 9054/47pr
5”Black Covers Part no. 9054/151p

I dont know how much they cost but with the exchange rate it's 30% off the Canadian $ listed

Dave
Click to expand...
I got the ones for my 70 Roadster from Walridge.
 
Here are the pics of the original shrouds:
Chrome Shrouds for Fastback Shocks

The dent is marked.

It is hard to see because of the chorme reflektions.
Chrome Shrouds for Fastback Shocks


The original shrouds are shorter than the Girling style shrouds.
Chrome Shrouds for Fastback Shocks
 
The upper shrouds I put on my combat roadster in 1989, to simulate the 1970 roadster look of my first bike, look just as good today.
A bit more money for stainless steel. I will transfer them to my current 1970 roadster build when done.
 
rivera said:
Here are the pics of the original shrouds:
Chrome Shrouds for Fastback Shocks

The dent is marked.

It is hard to see because of the chorme reflektions.
Chrome Shrouds for Fastback Shocks


The original shrouds are shorter than the Girling style shrouds.
Chrome Shrouds for Fastback Shocks
Click to expand...

thank you: this is very kind of you
can you tell the length and the diameter?
 
Status
Not open for further replies.
Back
Top