Ceriani GP rebuild

Hi Access Norton team,

about 2 months ago I took these Ceriani GP forks apart because they leaked, and after doing some reasearch, it seems like the setup (i have inherited from a very experimental builder) is very customized.

The springs in here are 25cm long, and the original Ceriani springs seem to be 35mm long.

Can one of you help me by pointing out which parts i'm missing, which ones are self made, and if i can go back to original condition from here... i have a hard time finding a diagram that shows the original state of the Ceriani internals.

Small chance the tubes of the suspensions have been shortened - in that case i might just want to find a stiffer 25cm long spring. Right now the front feels very soft.

Thank you for helping!!

Hi Marian
I will find Tony Foales post on Facebook & post a link.

This article might help.



Ken

Hi

Thank you so much guys, this helps a lot!

I ordered a lot of the seals and parts etc through https://www.pentonpartsusa.com

In the end I sent an email with what I was looking for, and Alan was able to steer me in the right direction of what parts I would need.