Brooking 850
VIP MEMBER
- Joined
- Oct 3, 2011
- Messages
- 1,609
Had this lent to me by an engine builder recently to get the exact same idle on the carbs
Anyone on the forum had experience with one of these?
With the bike warmed and running, press it up to the mouth of the carb(if space allows) , rotate the centre dial in (or out), to get the ball in the glass tube to rise on first carb, note where on the tube,then put it over the mouth of the second carb and adjust idle to match height of ball in tube to the first carb. (cable lengths must be set first)
Called 'Synchro Test'
Anyone on the forum had experience with one of these?
With the bike warmed and running, press it up to the mouth of the carb(if space allows) , rotate the centre dial in (or out), to get the ball in the glass tube to rise on first carb, note where on the tube,then put it over the mouth of the second carb and adjust idle to match height of ball in tube to the first carb. (cable lengths must be set first)
Called 'Synchro Test'