cam lobe height

just checking to see if anybody has any good information on helping me identify a camshaft I belive it to be out of a 71 s roadster... unfortunately the motor 's primary case was gone with this bottom end ... the lobe height is 1.225 in... 31.13.mm the location where I belive the casting number to be is there is miscast ... it looks like 73 or somthing... I will post pictures.... just got the fag bearings in & itchen to start the motor work...

If all lobes are the same them probably a standard cam.

Just measured a std camshaft I have on my work bench. Lobes were 1.225".

Here's a picture I took with a SS next to an unmarked standard.
Can you guess which is which?

SS on the left. (duration)

You cannot tell with 110% accurately what cam it is without looking up the cam lobe duration and valve lift, which may have some wear with use.
Below is something from a. n. other website;

peter-williams-t17917-30.html