BSA Rocket 3 rear wheel to respoke

P

pierodn

Joined
Nov 10, 2012
Messages
3,154
Country flag
I need to respoke the rear 19 stock wheel of my 1969 BSA Rocket 3.

I bought the 40 spokes new (i dont have the older) but they are 20 of onevlenght and the other 20 a little bit longer.

I mean 20 goes on drive side inner/outer and the other 20 on the timing side.

If it is right, wich spoke goes one side and other side?.

Second question, please, the rim goes perfect central with the hub or has a offset? in case how much and in wich side?

Thanks for helping me.

Regards.

Piero
 
According to the '69 A75 factory manual, the 20 timing side rear wheel spokes are 8-3/8" (8.375) inches, and the 20 drive side spokes are 8.0 inches.
 
L.A.B. said:
According to the '69 A75 factory manual, the 20 timing side rear wheel spokes are 8-3/8 (8.375) inches, and the 20 drive side spokes are 8.0 inches.
Click to expand...

Dear Les,
please again.
Has the rear rim an offset from the center of the hub?.
Regards.
Piero
 
pierodn said:
Has the rear rim an offset from the center of the hub?.
Click to expand...

Sorry, I don't have that information as it isn't given in the factory manual.

Personally, I do not to rely on any specific offset measurement, but build up the wheel with the rim as close to the frame centre line as possible.
 
L.A.B. said:
pierodn said:
Has the rear rim an offset from the center of the hub?.
Click to expand...

Sorry, I don't have that information as it isn't given in the factory manual.

Personally, I do not to rely on any specific offset measurement, but build up the wheel with the rim as close to the frame centre line as possible.
Click to expand...
Hi Les,
I mean and i will do.
Please again: you give me the lenght 8 3/8 (8.375 inches). But 3/8 is not 0,9525?
What i dont understand?
Thank you a lot.
Regards.
Piero
 
pierodn said:
Please again: you give me the lenght 8 3/8 (8.375 inches).
Click to expand...

" = dimension in inches
3/8" written as a fraction (three eighths of one inch) or 0.375" written as a decimal of 1 inch.

pierodn said:
But 3/8 is not 0,9525?
Click to expand...

Yes, but it is the metric dimension, thus: 3/8" = 0.375" = [Edit] 9.525mm (0.9525cm)

Therefore:

8" (or 8.0 Inches) = 203.2mm

8 3/8" (or 8.375 inches) = 212.725mm



http://www.hamuniverse.com/antfrac.html

http://www.gordonengland.co.uk/conversion/length.htm

:)
 
pierodn said:
You'll surely understand that mathematics is not for me!.
Click to expand...

Or me, today, as I got the decimal point in the wrong place. :oops: :roll:

Should have been = 9.525mm (0.9525cm) - now corrected.
:wink:
 

Similar threads

T
Fitting Mk 3 rear wheel
Replies
10
Views
495
L.A.B.
L.A.B.
P
  • Locked
Front drum wheel to respoke
Replies
8
Views
897
pierodn
P
tribonnie
  • Locked
Mk 3 Rear Wheel Info
Replies
2
Views
546
L.A.B.
L.A.B.
N
  • Locked
MK 3 Rear wheel .Info Req
Replies
1
Views
501
L.A.B.
L.A.B.
C
  • Locked
70 Rear Wheel 3/8" to the left
Replies
17
Views
1,172
J.A.W.
J
Back
Top