Brown & Blue wire

Status
Not open for further replies.

Flo

Joined
Aug 4, 2009
Messages
777
Amazing how a small wire like this feeds the whole wiring system. Looks around an 8 amp.
Mind you, been good for many a year.
 
In pre-decimilization days, when it was still ₤-s-d, amps used to be worth more, so you needed less of them and the skinny wire was OK. :wink:
 
Flo said:
Amazing how a small wire like this feeds the whole wiring system. Looks around an 8 amp.
Mind you, been good for many a year.

Are you suggesting that if you were to build a custom harness, that one might be thicker?
 
swooshdave said:
Flo said:
Amazing how a small wire like this feeds the whole wiring system. Looks around an 8 amp.
Mind you, been good for many a year.

Are you suggesting that if you were to build a custom harness, that one might be thicker?

Something to think about. I built my own harness and used all the same guage of wire. Thinking back now, I might have used a thicker guage for the hot perhaps.
 
They're all hot, no? I don't mean, hot, as in not connected to ground, but hot, as in, carrying the same current as the brown blue ones. (That's a real question, BTW - if I'm wrong, I'd like to be educated.)

Having said which, yeah, I'd like to rebuild my own (Mk I) using 12 gauge wire throughout. Overkill - gotta love it!
 
According to my copper wire chart, #8 wire is good for 46 amps in conduits or bundles and #12 wire is good for 23 amps, which will correspond to the breakers in your house panel if you look at them. #10 is good for 30 amps. So I think even #12 wire should be plenty good enough for anything unless you have some special equipment. I would use stranded wire on a Norton instead of the solid copper wire like house wiring.

Dave
69S
 
Yeah, I think people use 8 gauge for battery-to-electric starter connections on fairly heavy bikes. No kickstart Norton should need anything that heavy! 12 gauge is overkill I'm sure but hey why not?
 
Status
Not open for further replies.
Back
Top