Brembo front brake

Hello, inspired from Jim`s post I also got away with my Grimeca 2 pot caliper and fitted a 4 pot Brembo P3034F. Difference to Jim`s aplication is that I got a 305mm RGM floating disc. Took the Brembo drawing to get best possible position of the brake pads on the disc and made on CAD a construction for the bracket. Unfortunately my machineshop can`t lasercut 12mm alloy plates so I build my bracket with handsaw and files and ellbow grease. Took a 5083 12mm alloy. I am very satisfied with the result and this brake is a one finger operating brake. Got a PS12 Brembo mastercylinder...
this is the drawing....picture in the background is just for orientation:

and this is my result :)
 
Hello, inspired from Jim`s post I also got away with my Grimeca 2 pot caliper and fitted a 4 pot Brembo P3034F. Difference to Jim`s aplication is that I got a 305mm RGM floating disc. Took the Brembo drawing to get best possible position of the brake pads on the disc and made on CAD a construction for the bracket. Unfortunately my machineshop can`t lasercut 12mm alloy plates so I build my bracket with handsaw and files and ellbow grease. Took a 5083 12mm alloy. I am very satisfied with the result and this brake is a one finger operating brake. Got a PS12 Brembo mastercylinder...
this is the drawing....picture in the background is just for orientation:

and this is my result :)

Very cool looking bike
 
Back
Top