- Joined
- Oct 28, 2014
- Messages
- 1,869
I have a Boyer black box...the power wire from the harness going to the white wire on the Boyer box reads 12.5 volts. As soon as I connect the white wire it drops to 2.4 volts. Why? No spark.
Triton Thrasher had provided the most likely devices at fault. Look there first.Here's a new one.....The hot wire I was using, white/brown, reads 12.5 but no spark. If I run a jumper to the - battery terminal I get a good spark. For some reason the hot wire is unusable. Why?
I could find no other hot wire to work with. Usually it is a white/yellow or white but nothing showed 12V. I found a s spare tab on the key switch so I used that.
It is someone else's Norton. I used a meter to find a hot wire.
It is someone else's Norton. I used a meter to find a hot wire.
It is someone else's Norton. I used a meter to find a hot wire.