- Joined
- May 4, 2005
- Messages
- 46
Has anyone converted their bike to negative ground? and will converting my current Boyer to run require me to just simply reverse the wiring( on the coils and the Boyer unit) or does the internal electronics require the positive ground setup. Any advice would be appreciated. My current unit is analog, I assume with the digital it would not be possible.
I have purchased a 3 phase Tympanion reg/ rectifier and it requires neg ground. I figure this gives me the opertunity to convert the bike, with neg ground. I would get more flexability and choices as fas as modern electronics, LED bulbs, etc.
I have purchased a 3 phase Tympanion reg/ rectifier and it requires neg ground. I figure this gives me the opertunity to convert the bike, with neg ground. I would get more flexability and choices as fas as modern electronics, LED bulbs, etc.