Best source for braided hose?

Status
Not open for further replies.
gatsby

gatsby

VIP MEMBER
Joined
Feb 20, 2012
Messages
234
Country flag
Hi Gents - what is the best source for braided hose these days?
Thanks!
Gatsby
 
Gatsby,
You can try ClassicBikeSpares in California. I don’t know anything about shipping to Canada. I bought their 3’ length and it worked fine. I am not sure what you mean by braided hose.Hope this helps
Mike
 
In the States, i like Pegasus Racing

Hose & Hose Ends - Pegasus Auto Racing Supplies

Whether your system requires AN braided stainless or textile-reinforced rubber hose with AN or BSP fittings, Pegasus has the hose and hose ends you need.
www.pegasusautoracing.com www.pegasusautoracing.com

But they don't carry XRP which are hands down the best AN fittings (if you're doing that)

Cool Vibrations is a good source for those

www.goodvibesracing.com

Good Vibrations Motorsports

www.goodvibesracing.com
 
YING said:
Gatsby,
You can try ClassicBikeSpares in California. I don’t know anything about shipping to Canada. I bought their 3’ length and it worked fine. I am not sure what you mean by braided hose.Hope this helps
Mike
Click to expand...
Thank you! I did get mixed up. Herringbone is what I meant to say. Thank you!
 
TomU said:
In the States, i like Pegasus Racing

Hose & Hose Ends - Pegasus Auto Racing Supplies

Whether your system requires AN braided stainless or textile-reinforced rubber hose with AN or BSP fittings, Pegasus has the hose and hose ends you need.
www.pegasusautoracing.com www.pegasusautoracing.com

But they don't carry XRP which are hands down the best AN fittings (if you're doing that)

Cool Vibrations is a good source for those

www.goodvibesracing.com

Good Vibrations Motorsports

www.goodvibesracing.com
Click to expand...
Very nice offerings with these two suppliers. Exactly what I’m looking for:)
 
Have you tried British Cycle Supply? I use them on fuel line fittings.
Some will frown on using these for oil lines. DD said Too much stress at the oil tank.
You need some end caps to deal with the loose wires. hose ferrules on each end.
 
Last edited:
L.A.B. said:
Gatsby actually wanted Herringbone not braided hose and that was over a year ago!
Click to expand...
Must have been liked today as it was at the top of my list of notifications. Sorry about that - this is why I like them closed!
 
No harm done. All the original likes were Sept. 22/24, 2022.
 
I use car parts in my brake systems. An associate supplies components to hot-rod shops. Brake parts are probably standardised. I have braided lines front and rear. For racing, braided lines are essential.
 
Status
Not open for further replies.
Back
Top