- Joined
- Sep 24, 2010
- Messages
- 530
Here are a couple of photos of my head, when I purchased my bike it was leaking a little oil and bubbling at the back of the head, assumed the head needed re-torqueing, took it off for good measure.
Look at the rear bolt holes ( near spark plug, carbon and oil staining ).
There is some sort of insert that has been installed, which is fouling the head gasket, as can be seen by the indent in the head gasket, is this type of insert common in the Atlas head ?.
Look at the rear bolt holes ( near spark plug, carbon and oil staining ).
There is some sort of insert that has been installed, which is fouling the head gasket, as can be seen by the indent in the head gasket, is this type of insert common in the Atlas head ?.