- Joined
- Jun 1, 2011
- Messages
- 556
Finally got to the engine rebuild after 4 years. The motor had a knock. Didnt seem bad. I dont have the time, tools, place or skill to do the rebuild.
Wish I could do it myself but reality says it wont happen.
Stopped by the shop yesterday after he called and told me he had it torn down. Much worse that I had hoped.
Too much clearance on one piston. Main crank roller bearing had let go and fell apart. Only about 5 rollers left inside it.
Worn cam followers, worn bushings in the trans. Believe it or not, one rod journal was ground .010 under and one was standard size.
Its hurt but can be saved. Budget went out the window. I guess the good part is that it should be back on the road this summer,
but I have to save up for some tires. Cant really put it back on the road with 30 year old tires.
Its coming along, slow but sure. At least some progress is happening. Still a long way to go.
Wish I could do it myself but reality says it wont happen.
Stopped by the shop yesterday after he called and told me he had it torn down. Much worse that I had hoped.
Too much clearance on one piston. Main crank roller bearing had let go and fell apart. Only about 5 rollers left inside it.
Worn cam followers, worn bushings in the trans. Believe it or not, one rod journal was ground .010 under and one was standard size.
Its hurt but can be saved. Budget went out the window. I guess the good part is that it should be back on the road this summer,
but I have to save up for some tires. Cant really put it back on the road with 30 year old tires.
Its coming along, slow but sure. At least some progress is happening. Still a long way to go.