Brooking 850
VIP MEMBER
- Joined
- Oct 3, 2011
- Messages
- 1,609
Anyone on the forum running 34mm twin Amal Mk2's on a standard 1973 850 and if so what would your needle clip, jetting and slide sizes be?
regards Mike
regards Mike
What ignition do you have?Yes, I tried a 15, 25, then 22, to see if it evened out my idle. Ended up back at the 20, which gives me a sweet spot in the recommended range of adjustment of the air screw. I live with the lumpy idle.
Looks like that is a no then.Anyone on the forum running 34mm twin Amal Mk2's on a standard 1973 850 and if so what would your needle clip, jetting and slide sizes be?
regards Mike
I had a Sudco Norton kit with 34mm Mikuni carbonators on a 750. Very irrelevant.storm42, Looks like it and to stop any off thread topics, I should of stated that is a road bike on petrol!!!
I have plenty of carbs to choose from , just that I have a brand new set of 34's I would like to try.
I have a set of 32 Concentric Mk 1 Premiers with a single pull gantry that came off my race bike (now has 34. mm Smoothbores) and ran that really well with a RH10 head , so have them to go to if need be.