SCS Delta 400 Users Group

[City Garage]

Hello Delta users...
. Also SCS haven't managed to sort out my low fuel light yet and with this fuel consumption it is a problem .

What does SCS have to do with the low fuel light?

 

[Gazz]

This is my mine :

Thanks Tony, both yours and Clive's print out looks a lot better thank mine. I definitely need something done to improve mine. Before spending more on hardware I'm going to call the guys who mapped it and see what they say.

I appreciate your input

 

[Gazz]

What year is your bike? ABS?
Why not take the bike to a proper dyno?

It's a 2018 model formally with a Omex ECU. Euro 4 with ABS.

It was remapped on a Dyno, an authorised dealer for Dynojet. They said they'd had experience of SCS software and ECU.

 

[TonyA]

It's a 2018 model formally with a Omex ECU. Euro 4 with ABS.

It was remapped on a Dyno, an authorised dealer for Dynojet. They said they'd had experience of SCS software and ECU.

They should be able to improve that for you.

 

[TonyA]

What does SCS have to do with the low fuel light?

I seem to remember that the newest bikes use an output pin of the ecu to turn on the low fuel warning light.

 

[Gazz]

I seem to remember that the newest bikes use an output pin of the ecu to turn on the low fuel warning light.

Yes, that is correct ..

 

[Gazz]

Hello Users....

Today I had SCS hook up and try to resolve my low fuel light problem on my Euro4 CR.

Unfortunately, this problem is still not resolved, during the troubleshooting I tried to locate 'low fuel light' relay on my bike. Only two wires are connected to it, yellow and white and black and green, according to the Euro service manual. The manual points to it being under the tank somewhere near the coils, but I can't find it! Has anyone ever seen it and know it's location?

Thanks
Garry

 

[Gazz]

Hello Users....

Today I had SCS hook up and try to resolve my low fuel light problem on my Euro4 CR.

Unfortunately, this problem is still not resolved, during the troubleshooting I tried to locate 'low fuel light' relay on my bike. Only two wires are connected to it, yellow and white and black and green, according to the Euro service manual. The manual points to it being under the tank somewhere near the coils, but I can't find it! Has anyone ever seen it and know it's location?

Thanks
Garry

I've just found it! Its in the headlamp shell should anyone need to know!

 

[TonyA]

I've just found it! Its in the headlamp shell should anyone need to know!

Are you kidding me ? Really I would never have known that. My 2014 does not have a relay in the headlamp shell. What year is your Euro4 CR ?

 

[Gazz]

Are you kidding me ? Really I would never have known that. My 2014 does not have a relay in the headlamp shell. What year is your Euro4 CR ?

Hi Tony, it was manufactured in 2018.

I swapped over the relay for another of the same type from under my seat, I was optimistic but alas made no difference.

SCS were able to switch my low fuel light on and off whilst they were connected, but it doesn't work when low on fuel ..

SCS are looking into this..

I may try a Omex ECU to see if it works with that... I am also wondering if it the actual sensor giving me this grief. Putting on Omex back on will hopefully put that to bed.