tried these bags?

Status
Not open for further replies.
Alan,
Can you show a picture of these bags mounted?
Thanks,Mike
 
They look OK to me, I need to look a bit closer, would be good if someone on here as tried them!
Ok had a look on their website, but it is a bit confusing, is the $60 for two bags or is it for one bag, the young girl is good to the eye I must amit.


Burgs
 
Last edited:
actually i used a couple of pieces that go on the rod caps/bolts on MGB crank but i think you could also do it with a couple of clamps from the hardware store similar to the ones that hold the seat grab rail on (i forget the proper name) with holes big enough for the Emgo mini signal stalks to go through....just something to wrap around frame rails and then run stalk stems through and tighten
tried these bags?
 
A very nice looking ride Alan !!!, especially when I compare to that first photo you sent ....
 
alan hodge said:
actually i used a couple of pieces that go on the rod caps/bolts on MGB crank but i think you could also do it with a couple of clamps from the hardware store similar to the ones that hold the seat grab rail on (i forget the proper name) with holes big enough for the Emgo mini signal stalks to go through....just something to wrap around frame rails and then run stalk stems through and tighten
tried these bags?
Click to expand...
P-clamp.

Nice ride.
 
Thanks Alan
I mounted mine with a small plate right off the upper shock stud where I could use a spacer to extend them with the bags on. I am using a pair of CNW bag mounts that fit perfectly but would like to put a set of larger bags on. I am curious to see if those bags you tried would work with my mounts.
Matt quit making these mounts but I love the way they fit plus they are quick to remove.
Mike
 
Status
Not open for further replies.

Similar threads

T
  • Locked
has anyone tried these replacments
Replies
10
Views
1,229
tjfisher
T
Back
Top