- Joined
- Feb 21, 2019
- Messages
- 1,067
not a significant leak - kind of minor, no drips, just a little seepage. usually don't have O-ring issues - installed a few over the years but this primary case O-ring is a bit of a booger. installed new TWICE, and still getting a little seepage. fairly sure the O-ring groove is okay - same for the outer case flange surface - appears to be flat - no other issues. installed the O-ring with a light coating of general purpose, synthetic blend, grease. hold down bolt torqued to spec. so, any installation suggestions, or is a little seepage somewhat normal?